Gentiger GT-875-5AX
| MODEL | T15P |
|---|---|
| Travel (X / Y / Z) | 820mm / 750 mm / 500mm |
| Cutting Feedrate | 20 m/min |
| Rapid Feedrate | 45 m/min |
| Table Area | Ø600 sq.500 |
| T-slot | N°5 width 14 / 100 mm |
| Height Of Table From Ground | 985 mm |
| Distance From Spindle Nose To Table Surface | 100 ~ 600 mm |
| Max. Load Of Table (Average Load) | 500 kg |
| Max. Spindle Speed | 15,000 rpm |
| Type Of Spindle Motor | Direct Drive |
| Bearing Lubrication | Grease |
| Spindle Cooling | Oil Cooling |
| Spindle Taper | BT-40 |
| Spindle Motor | 10 / 17 kw |
| Spindle Torque | 63.7 / 108.6 Nm |
| Spindle Bearing Ins.diameter | Ø70 mm |
| Atc Capacity | 30 tools |
| Atc Tool System | BT-40 |
| Max. Tool Diameter | Ø76 mm |
| Max. Tool Length | 300 mm |
| Max. Tool Weight | 7 kg |
| Motor Of Tool Magazine | 375 w |
| Controller | HEIDENHAIN |
| Servo Motor For 5 Axes | 8.6 kw(X) / 5.6 kw(Y) / 5.1 kw(Z) / 5.0 kw(A) / 2.3 kw(C) |
| Air Pressure Requirement | 7 kgf/cm2 |
| Air Conditioner | 750 w |
| Spindle Cooler | 1.2 kw |
| Automatic Lubricator (Slideways) | 150 w |
| Coolant Motor | 2 kw |
| Chip Flush Motor | 2 kw |
| Total Power Consumption(Max.) | 55 kw |
| Coolant Tank Capacity | 434 Liter |
| Machine Dimension | 3,880 x 3,087 x 3,300 mm |
| Packing Dimension | 4,082 x 3,000 x 3,900 mm |
| Machine Net Weight | 13,400 kg |
| Machine Gross Weight | 15,000 kg |
