Gentiger GT-175V
| MODEL | T15P | ||
|---|---|---|---|
| Travel (X/Y/Z) | 1100 x 720 x 500 | ||
| Cutting feedrate | 20 m/min | ||
| Rapid feedrate | 48 m/min | ||
| Table area | 1200 x 720 mm | ||
| T-slot | 18 / 110 x 7 mm | ||
| Height of table from ground | 715 mm | ||
| Max. Height of working piece | 440 / 500 mm | ||
| Distance from spindle nose to table surface | 90 ~ 590 mm | ||
| Max. Load of table (average load) | 1000 kg | ||
| Max. Spindle speed | 15000 rpm | ||
| Type of spindle motor | Direct Drive | ||
| Bearing lubrication | Grease | ||
| Spindle cooling | Oil Cooling | ||
| Spindle taper | BT-40 | ||
| Spindle motor | 11 / 14.75 kw | ||
| Spindle torque | 70 / 94 Nm | ||
| Spindle bearing ins. diameter | Ø70 mm | ||
| ATC capacity | 30 tools | ||
| ATC tool system | BT-40 | ||
| Max. Tool diameter | Ø75 mm | ||
| Max. Tool length | 300 mm | ||
| Max. Tool weight | 7 kg | ||
| Motor of tool magazine | 375 w | ||
| Motor of CAM BOX | 375 w | ||
| Air pressure requirement | 7 kgf/cm2 | ||
| Air conditioner | 960 / 1170 w | ||
| Spindle cooler | 2900w (50HZ) / 3500w (60HZ) | ||
| Automatic lubricator (slideways) | 150 w | ||
| Coolant motor | 750 w | ||
| Chip flush motor | 1580 w | ||
| Total power consumption (Max.) | 40 kw | ||
| Coolant tank capacity | 280 Liter | ||
| Controller | SIEMENS | FANUC | HEIDENHAIN |
| Servo motor for 3 axes | 5.37 kw(X) 4.87 kw(Y,Z) | 7 kw(X/Y/Z) | 8.6 kw(X) 5.6 kw(Y) 5.1 kw(Z) |
| Machine dimension | 4430 x 3550 x 2820 mm | ||
| Packing dimension | 4950 x 3300 x 3600 mm | ||
| Machine net weight | 10,300 kg | ||
| Machine gross weight | 12,000 kg | ||
