Gentiger GT-1614V
| MODEL | T10 | T15 | S24A |
|---|---|---|---|
| Travel (X / Y / Z) | 1,400 x 1,600 x 600 / 700 mm (Opt.) | ||
| Cutting Feedrate (X / Y / Z) | 20 x 18 x 20 m/min | ||
| Rapid Feedrate (X / Y / Z) | 20 x 18 x 20 m/min | ||
| Table Area | 1,500 x 1,600 mm | ||
| T-Slot | 22 / 200 x 8 mm | ||
| Height of Table from Ground | 880 mm | ||
| Max. Height of Working Piece | 1,600 x 1,800 x 600 / 850 mm (Opt.) | ||
| Distance from Spindle Nose to Table Surface | 300 ~ 900 mm / 320 ~ 1,020 mm (Opt.) | ||
| Max. Load of Table (Average Load) | 5,000 kg | ||
| Max. Spindle Speed | 10,000 rpm | 15,000 rpm | 24,000 rpm |
| Type of Spindle Motor | Direct Drive | Direct Drive | Built-in |
| Bearing Lubrication | Grease | Grease | Oil-Air |
| Spindle Cooling | Oil-Cooling | Oil-Cooling | Water-Cooling |
| Spindle Taper | BT / BBT-50 | BT / BBT-40 | HSK-A63 |
| Spindle Motor | 22 kw | 11/14.5 kw | 30/39 kw |
| Spindle Torque | 140 Nm | 74/130 Nm | 29.1/38.7 Nm |
| Spindle Bearing Ins.Diameter | Ø90 mm | Ø70 mm | Ø65 mm |
| ATC Capacity | 20 tools / 40 tools (Opt.) | ||
| ATC Tool System | BT / BBT-50 | BT / BBT-40 | HSK-A63 |
| Max. Tool Diameter | Ø133 mm | Ø100 mm | Ø100 mm |
| Max. Tool Length | 300 mm | 250 mm | 250 mm |
| Max. Tool Weight | 15 kg | 7 kg | 7 kg |
| Total Power Consumption (Max.) | 58 kw | ||
| Coolant Tank Capacity | 400 Liter | ||
| Controller | SIEMENS | ||
| Servo Motor for 3 Axes | X: 15.7 kw / Y, Z: 10 kw | ||
| Machine Dimension | 4,665 x 4,605 x 3,610 mm | ||
| Packing Dimension | 5,350 x 4,000 x 3,700 mm | ||
| Machine Net Weight | 22,500 kg | ||
| Machine Gross Weight | 24,500 kg | ||
