Gentiger GT-138V
| MODEL | T10 | T15 | S24A |
|---|---|---|---|
| Max. spindle speed | 10,000 rpm | 15,000 rpm | 24,000 rpm |
| Spindle taper | BT-50 / BBT-50 | BT-40 / BBT-40 | HSK-A63 |
| Spindle motor | 22 kw | 11 kw | 39/30 kw |
| Spindle Torque | 172 / 320 Nm | 74 / 130 Nm | 29.1 / 38 Nm |
| Inner dia. of spindle bearing | Ø90 | Ø70 | Ø65 |
| Bearing lubrication | Grease | Grease / Oil-Air (opt.) | Oil-Air |
| Spindle cooling | Oil-cooling | Oil-cooling | Water-cooling |
| Distance from spindle nose to table surface | 300~900 mm / 200~800 mm | ||
| Table area | 1400 x 850 mm | ||
| T-slot | 18 x 7 x 125 mm | ||
| Height of table from ground | 900 mm | ||
| Max. load of table (average load) | 2500 kg | ||
| Travel of X, Y, Z-axes | 1300 x 800 x 600 mm | ||
| Distance from spindle center to machine front | 1200 mm | ||
| Cutting feedrate | 20 m/min | ||
| Rapid feedrate | 20 m/min | ||
| ATC tool specification | BT-50 / BBT-50 | BT-40 / BBT-40 | HSK-A63 |
| ATC capacity | 20 | 20 | 20 |
| Max. tool length | 300 mm | 300 mm | 300 mm |
| Max. tool weight | 15 kg | 8 kg | 8 kg |
| Motor of tool magazine | 60 w | 60 w | 60 w |
| X, Y, Z-axis servomotors | 7.5 kw | ||
| Air pressure requirement | 7 kgf / cm2 | ||
| Air conditioner | 750 W / 550 W | ||
| Spindle cooler | 1950 W | 1950 W | 2650 W |
| Automatic lubricator (slideways) | 150w | ||
| Coolant motor | 750w | ||
| Chip flush conveyor | 1580w | ||
| Total power consumption (Max.) | 45 KVA | 45 KVA | 50 KVA |
| Coolant tank capacity | 420 Liter | ||
| Packing dimensions (L x W x H) | 382 x 382 x 385 cm | ||
| Net weight | 15,210 kg | ||
| Gross weight | 18,000 kg | ||
