MANFORD MH-320 / CNC İŞLEME MERKEZİ
Travel
| X axis travel | 230 (*205+25) mm |
|---|---|
| Z axis travel | 550 (*800/1,040) mm |
| X / Z Guide ways | Box way |
Capacity
| Swing over bed | Ø600 mm |
|---|---|
| Swing over saddle | Ø400 mm |
| Max. turning diameter | Ø400 mm |
| Drawtube capacity | Ø65 mm |
| Max. turning length | 500 (*750/1,000) mm |
Spindle
| Speed | 30~4,500 rpm |
|---|---|
| Nose | A2-6 |
| Power chuck system | 8 (*10) inch |
| Hole diameter | Ø66 (*Ø76) mm |
| Motor | 20 HP |
Turret
| Tool change type | SERVO |
|---|---|
| Number of tools | 12 (*10) |
| Turning shank size | 25×25 mm |
| Max turning bar diameter | Ø40 mm |
| Power tooling | N/A |
| Power tooling motor | N/A |
| Power tooling speed | N/A |
Feed Rate
| Cutting feed rate | X cutting feed rate:0~10,000 mm Z cutting feed rate:0~10,000 mm |
|---|
Tailstock
| Tailstock body travel | 580 (*830/1,080) mm |
|---|---|
| Quill travel | 100 mm |
| Quill taper | 5 MT |
| Quill diameter | Ø85 mm |
Rapid
| X axis travel | 20 M / min |
|---|---|
| Z axis travel | 24 M / min |
| X cutting feed rate | 0~10 M |
| Z cutting feed rate | 0~10 M |
Tank Capacity
| Hydraulic | 50 L |
|---|---|
| Hydraulic motor | 2 HP |
Equipment Requirement
| Power requirement | 25 KVA |
|---|
Machine Dimension
| Net weight | 4,800 (*5,300/5,800) Kgs |
|---|---|
| Length | 2,750 (*3,000/3,550) mm |
| Height | 1,800 mm |
| Width | 1,860 (*1,860/1,950) mm |
